100KW Grid Tie Solar Inverter with VDE4105/EN62109
PV grid-connected power system includes PV modules, grid-connected inverter, and meter and power switchboard. The PV modules convert the solar energy to the DC power, then the grid-connected inverter the DC power to the sine wave AC power which has the same frequency and phase with the grid voltage, and then the AC power FEED-in the grid partly and the other power supply the local loads, it can save any surplus electricity.
Features:
1.Using IGBT from Mitsubishi company as the power components
2.Using American ATEMEL company microprocessor as figure controller
3.Perfect protection and warning functions
4. MPPT technology, real-time tracing wind turbine Max. output power
5.Disturbance detection technology, anti-island control
6..Circuit frame compact, Max. Efficiency≥94%
7.Outdoor stainless steel shell, fully sealed installation
8.Pure sine wave output, automatic synchronization grid connected, non-polluting to the power grid,
no impact
9.Inverting current close-cycle control, power to control and adjustable
10.Big-screen English LCD, perfect display, interface-friendly
Technical parameters: |
Type
|
SDS-100KW
|
Isolation
|
Low frequency transformer isolation
|
Max. DC input power
|
110kWp
|
Max. DC input voltage
|
800Vdc
|
Max.PV voltage range(MPPT)
|
450Vdc~780Vdc@595Vdc
|
Battery board Joint type
|
connection terminal
|
Max. Input current
|
245A
|
Nominal AC output power
|
100kW
|
Max. AC output power
|
110kW
|
THD of AC current
|
<3%(nominal power)
|
Power factor
|
>0.99
|
Max. Efficiency
|
96.5%
|
Euro efficiency
|
95.2%
|
Nominal AC voltage
|
310Vac~450Vac
|
Nominal AC frequency
|
47.5Hz~51.5Hz
|
Internal power consumption an night
|
<100W
|
Automatically put into operation conditions
|
When the DC input and power grids meet to the requirements, the inverters automated operation
|
Automatic restart time
|
5min(time adjustable)
|
Protection
|
Possess the protecting function of polarity connecting contrary, short circuit, island effects, over heat, over land
|
Comm. interfaces
|
RS485/RS232/GPRS/Ethernet
|
Operating Temp.
|
-25℃~+55℃
|
Relative humidity
|
0~95%,no condensing
|
Altitude(m)
|
≤2000meters(Over 2000 meters to reduce the using amount)
|
Cooling method
|
Controlled forced-air cool
|
Noise
|
≤60dB
|
Protection degree
|
IP20(indoor)
|
Size(W*L*H mm)
|
1000*800*2060
|
Weight
|
900Kg
|
|
|