100KW Solar stand-alone inverters for solar system no need backup batteries
Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbineand other renewable energy systems and etc, can supply power and provideguarantee effectivelyfor the areas withtraffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity.It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it ishigh efficiency and low no-load loss,and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
Technical Features:
Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.
Intelligentized, modularized, simple structure design easy to maintenance.
Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.
The output frequency can be setting via LCD panel, it’s very convenient for customer.
The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%.
The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel.
Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage.
Low frequency transformer which ensure the DC busbar and AC busbar are completely isolated to avoid interference.
Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-500V or 200-850V.
High conversion efficiency, Max. Efficiency≥96%
Adopts black pure aluminum radiator, which confirms the best radiating performance.
Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.
Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-500V or 200-850V.
European CE (EMC, LVD) certificate, accredited by Australian CEC, ERAC energy network.
[Optional]
RS485 remote monitoring;
Can addAC bypass complementary function;
Technical Parameters
Model
SDP-80KW
SDP-100KW
Isolation mode
Low Frequency Transformer
DC Input
Rated voltage (Vdc)
500V
Input voltage range (Vdc)
400-850V
Rated current(A)
160A
200A
AC Input
Rated voltage (Vac)
3 phase 380VAC
AC Output
Rated output power
80KW
100KW
Output waveform
Pure Sine Wave
Rated Voltage
380VAC±3%
380VAC±3%
Phases
3 phase 4 wire
3 phase 4 wire
Rated current(A)
121A (phase current)
152A (phase current)
Frequency
50Hz or 60Hz
Rated output voltage range (V)
380/400/415/440VAC optional
Power Factor(PF)
0.95
Overload Ability
150%, 5 seconds
Efficiency
>93%
Waveform distortion rate (THD)
<3%(Linear load)
DynamicResponse(0 to 100%load)
5%,≤50ms
Display
LCD
Running mode
Working continuously
Electrical insulation properties
2000Vac, 1 Minute
Protection Function
Protection
Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Cooling method
Fan-cooled
Short-circuit protection
Noautomatic recovery, need torestart the machine
Working environment
Noise ( 1 meter)
≤50dB
Degree of protection
IP20(indoor)
Working Altitude(m)
≤2000
Working temperature
-25~+55℃
relative humidity
0~90%,non-condensing
Mechanical dimension
Depth*Width*Height
900x1100x1600mm
Weight(Kg)
520Kg
600Kg
Payment Terms︰
TT
Product Image
100KW Solar stand-alone inverters for solar system no need backup batteries
100KW off grid solar inverter work without backup batteries