DC to AC Solar Inverter for industrial use 40KW
  • DC to AC Solar Inverter for industrial use 40KW
  • 40kW off grid battery inverter for 3 phase hybrid load use
  • Sandi off grid inverter input & output breaker
  • DC to AC Solar Inverter for industrial use 40KW
  • DC to AC Solar Inverter for industrial use 40KW

DC to AC Solar Inverter for industrial use 40KW

Model No.︰

SDP-40KW

Brand Name︰

SANDI

Country of Origin︰

China

Unit Price︰

US $ 1 / pc

Minimum Order︰

1 pc

Share on:

Product Description

DC to AC Inverter for industrial use 40KW

 

Sandi pure sine wave series inverter is one of the most advanced DC to AC conversion products in the world, it has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is simple, stable, no noise and no pollution. It is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine etc. The inverter can also supply AC voltage to all kinds of power tools, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other power supply.

The inverter output waveform is pure sine wave; this kind of AC power is suitable for most industrial electronics and home appliances, the power supply features much better than other modified sine wave and square wave.


Technical Features:

1, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the nature of their load.

2, The output frequency can be set, this function is very convenient for customer.

3, The output voltage can be set between +20 % to -40 % of rated voltage. It’s a great convenience to users.

4, The DC input voltage range can also be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be set via the LCD panel. Convenient for increasing or reducing the quantity of batteries, photovoltaic modules also can be used flexibly.

5, Pure sine wave output. with good transient response less than 40MS, little harmonic distortion, higher conversion efficiency and stable output voltage.

6, Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

7, Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. It’s service life can up to 15 years or more.

8, Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-500V or 200-850V.

9, Product have passed the European CE (EMC and LVD) certificated and accredited by Australia CEC energy network.

 

Technical Parameters (Normal model)

Model

SDP-30KW

SDP-40KW

Isolation mode

Low Frequency Transformer

DC Input

Rated voltage (Vdc)

240V

300V

360V

Rated currentA

125A

100A

111A

AC Output

Rated output power

30KW

40KW

Output waveform

Pure Sine Wave

Rated Voltage

220V±3%

380VAC±3%

220V±3%

380VAC±3%

Phases

Single phase

3 phase 4 wire

Single phase

3 phase 4 wire

Rated currentA

136A

45.5A (phase current)

182A

61A (phase current)

Frequency

50Hz or 60Hz

Rated output voltage range (V)

220/230/240/380/400/415VAC optional

Power FactorPF

0.95

Overload Ability

150%, 5 seconds

Efficiency

>93%

Waveform distortion rate (THD)

<3%Linear load

Dynamic Response (0 to 100% load)

5%≤50ms

Display

LCD

Running mode

Working continuously

Electrical insulation properties

2000Vac, 1 Minute

Protection Function

Protection

Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.

Cooling method

Fan-cooled

Short-circuit protection

No automatic recovery, need to restart the machine

Working environment

Noise ( 1 meter)

≤50dB

Degree of protection

IP20indoor

Working Altitudem

≤2000

Working temperature

-25~+55

relative humidity

0~90%non-condensing

Mechanical dimension

Depth*Width*Height

650x750x1100mm

Weight Kg

260Kg

350Kg

             


Payment Terms︰ TT

Product Image

DC to AC Solar Inverter for industrial use 40KWDC to AC Solar Inverter for industrial use 40KW

40kW off grid battery inverter for 3 phase hybrid load use 40kW off grid battery inverter for 3 phase hybrid load use

Sandi off grid inverter input & output breakerSandi off grid inverter input & output breaker

ZHEJIANG SANDI ELECTRIC CO., LTD  

Email: zjsandi@sandi.cc / katrinayi87@yahoo.com               Skype: katrina0682

Mobile / WhatsApp / WeChat: +86 13858880682                                          QQ: 1276317917

Tel: +86-577-62793760                                                                          Fax: +86-577-61209955

Address: Lvao Industrial Zone, Liushi Town, Yueqing city, Zhejiang province, China.

Powered by DIYTrade.com